Skip to content
PergolaDraft

Planning tool · Pergola

Pergola Builder

Size the frame, check post and footing placement, and price a contractor-style material list. Every span over 12 ft automatically gets a center support post, and the top-view / elevation blueprints redraw as you adjust the plan.

  • Attached / freestanding / louvered
  • 12 ft bay rule built in
  • Live BOM + editable US prices
Pergola framing · Top viewLive

Center support posts automatically added

16 ft projection → 2 bays. Every bay is held to 12 ft or less, so the carrying beams and rafters stay within a safe span.

National Default (US) preset — 36" frost footing · 120 sq ft detached permit screen · rear 8 ft / side 5 ft setbacks.
Permit check — 192 sq ft · Attached exceeds the 120 sq ft US screen: verify local permit rules and pour 36" frost footings.
Open-slat shade design only — do not add solid roofing without re-engineering for snow/wind load.
TOP VIEWN.T.S. · 1 FT DRAFTING GRIDHOUSE WALLLEDGERCENTER POST12 FT16 FTBAY 12 FTBAY 8 FTCEDAR4 CONCRETE FOOTINGSAUTO CENTER SUPPORT4" O.C.

Largest bay

12 ft

≤ 12 ft limit

Rafter spacing

24" O.C.

7 rafters

Footings

4

4 bags each · 36" deep

Setbacks

8 / 5 ft

Rear / side · US

Area
192 sq ft
Posts
4
Concrete
16 bags
Frost
36" deep
Setbacks
8 / 5 ft
Est. Material Total
$2,180
Attached · Cedar · 24" O.C. · US

HOA & Permit Submittal Reference Pack

Hand one reference pack to your HOA, your AHJ, and your bidders

Print or save a reference pack with three vector sheets — Site Plan & Setbacks, Framing & Post Layout, and Front Elevation & Frost Footing — plus a title block, prescriptive code screen, footing depths, setback distances, and the full bill of materials. You can also copy the plain-text quote request or download the same package for a submittal file.

Structure
Attached · Western Red Cedar
4" shade purlin spacing
Footprint & Clear Height
12×16 ft
192 sq ft · 9 ft clear
Frost Footing Depth
36" below grade
4 footings · 18" sonotube
Max Bay & Rafters
12 ft max bay
24" O.C. · 7 rafters
State & Code Screen
National Default (US)
120 sq ft detached exempt · No climate overlay
Property Line Setbacks
Rear 8 ft · Side 5 ft
Meets the 5 ft minimum most HOA and zoning rules expect
DIY material baseline$1,962 – $2,398Materials only. Labor, permits, and delivery are priced by the contractor.

Print opens your browser dialog with three vector sheets, the code notes, and the BOM.

Runs entirely in this browser. No email, ZIP code, or account required.

Every bay is held to 12 ft and every footing to 36" below grade, so bidders quote the same frame.

FAQ · Pergola builder

Pergola spacing, footings & permit questions

The structural answers homeowners ask before digging the first footing.

How far apart should pergola posts be before adding a center post?
Keep 6×6 pergola posts no more than 12 ft apart along any beam run, and no more than 12 ft of projection away from the house ledger or rear post row. That 12 ft cap keeps double 2×8 or 2×10 carrying beams and 2×6 rafters inside a safe span so the top stays flat instead of sagging. A 10×10 ft pergola needs 4 freestanding posts (or 2 attached posts), a 12×16 ft attached pergola adds a center post to split the 16 ft run into two 8 ft bays, and a 14×20 ft freestanding frame uses 9 posts across a 3×3 grid.
How tall should a pergola be, and what size fits a dining table or sectional?
Set the clear height under the carrying beam between 8 ft and 10 ft for most backyards: 9 ft is the sweet spot for standard 8 ft patio doors and ceiling fans, while 10 to 12 ft suits two-story fascia lines or outdoor kitchens with vents. For footprint sizing, a 10×10 ft (100 sq ft) frame fits a bistro set or 4-person table, a 12×16 ft (192 sq ft) frame comfortably fits an 8-seat dining table or lounge set, and a 14×20 ft (280 sq ft) frame covers both a dining zone and a fire-pit sectional.
How much does a pergola cost to build DIY vs. hiring a contractor?
For a standard 12×16 ft (192 sq ft) pergola, DIY lumber, concrete footings, post bases, and structural hardware typically cost $1,100 to $1,700 in pressure-treated pine, $2,400 to $3,600 in Western Red Cedar, and $4,800 to $7,200 in extruded aluminum. Hiring a local contractor adds $1,800 to $4,500 in labor for footing excavation, ledger flashing, and framing, bringing professionally installed 12×16 pergolas to roughly $3,500 to $11,000+ depending on material and louver upgrades.
How deep do pergola post footings need to be, and can I attach a ledger to stucco or brick veneer?
Pour an 18 in diameter sonotube concrete footing below your local frost line—typically 12 in across Florida, Texas, Arizona, and coastal California, 30 to 36 in across the Mid-Atlantic and Midwest, and 42 to 60 in across New York, Michigan, Wisconsin, and Minnesota—and anchor each post to a galvanized standoff base above grade. Never lag an attached ledger directly into stucco or brick veneer; masonry veneer is non-structural skin. Either bolt through into a verified structural rim joist with metal Z-flashing and standoff spacers, or switch to a freestanding pergola set 1 to 2 in off the wall.
What are typical pergola permit requirements, and do I need a permit for a pergola?
Most US municipalities exempt one-story freestanding open-slat pergolas under 120 sq ft (in states like California and Washington) or 200 sq ft (under the standard International Residential Code), while attached pergolas bolted to a house ledger almost always require a building permit. Even when a building permit is exempt, local zoning setbacks (typically 5 to 10 ft from rear and side property lines) and HOA architectural review rules still apply. Select your state in the builder to screen your footprint against the local threshold and print the reference drawings.