Skip to content
PergolaDraft

Planning tool · Pavers

Paver Calculator

Estimate the whole patio build-up — pavers plus pattern cut waste, a compacted gravel base quoted in cubic yards and tons, the 1 in bedding-sand course, edge restraint, and polymeric joint sand. Every layer is sized from the same US imperial dimensions, and the plan view redraws as you change the bond.

  • Patio 4 in · Driveway 6 in base
  • 5–12% pattern waste
  • Cubic yards + tons
Paver layout · Running BondLive
RUNNING BOND · 4 × 8 INPLAN VIEW · PAVER SURFACE5% CUT WASTE16 FT12 FT192 SQ FT · 864 PAVERS NET · 908 WITH WASTE4 × 8 IN · 2.36 IN THICK · 1 IN BEDDING SAND · 4 IN COMPACTED GRAVELPATTERN AT REPRESENTATIVE SCALE

Pavers to buy

908

864 net + 5% cuts

Compacted base

4 in

2.37 cu yd compacted

Perimeter

56 ft

7 × 8 ft strips

BASE CROSS-SECTIONPATIO / WALKWAY · 4 IN COMPACTED BASELAYERS TO SCALE · 16 PX = 1 INFINISH GRADE7.36" EXCAVATIONPAVERS2.36 IN · 4 × 8 INBEDDING SAND1 IN · 32 × 50 LB BAGSCOMPACTED GRAVEL4 IN · 3.69 TONSORDER 2.73 CU YD LOOSE GRAVEL · 32 SAND BAGS · 3 POLYMERIC BAGS2.37 CU YD COMPACTED · 64.0 CU FT · PLATE-COMPACT IN 2 IN LIFTS
1

Pavers & pallets

Running Bond · 4 × 8 in · Red Brick

Pavers with waste
908pcs
Net pavers
864pcs
Cut waste (5%)
44pcs
Pallets
3pallets
Purchase area
201.6sq ft

Pallets hold ~100 sq ft of 4 × 8 in pavers. Order whole pallets; keep one aside for future repairs.

2

4" gravel base + 1" sand

Patio build-up · crushed road base

Gravel compacted
2.37cu yd
Order loose (+15%)
2.73cu yd
Gravel weight
3.69tons
Bedding sand
0.59cu yd
Sand bags
32× 50 lb
Excavation & dirt haul-away (7.36" dig)
4.36cu yd in-ground
Loose spoil (+25% soil swell)
5.45~ cu yd loose
Drainage slope (1/4" per ft)
4.00in drop

Gravel: 4" compacted 64.0 cu ft. Sand: 1" course, ~0.5 cu ft per 50 lb bag. Dig the full 7.36" cross-section; grade a 1/4" per ft fall away from the house (~4" drop).

Below typical 5-ton bulk delivery minimum — ask a local landscape yard about pickup or short-load fees before buying 148 costly 50 lb bags.

3

Edge restraint & joint sand

Exact perimeter from dimensions

Perimeter
56lin ft
Edge strips (8 ft)
7strips
10" spikes
56pcs
Polymeric sand
3× 50 lb
Joint sand weight
150lb

One spike per 1 ft of restraint. Polymeric sand covers ~65 sq ft per 50 lb bag at this paver face.

Order +10–15% for a second sweep after compaction, and blow dust clean before misting to prevent white poly haze.

4

Geotextile Fabric (Optional · Clay/Soft Soil)

Separation layer between subgrade and stone base

Total coverage (+10% overlap)
212sq ft
Standard 4×100 ft rolls
1roll

Recommended on clay or soft subgrades to prevent crushed stone from pumping into soil.

Next step · AI material preview

Running Bond · Red Brick · 4 × 8 in

Red clay brick preset, laid herringbone in the studio render. Studio preset: Red Brick Herringbone

Preview this paver pattern in your backyard
Dimensions in ft / in · waste by bond (5% / 5% / 8% / 12%)3 pallets · 3.69 tons base

FAQ · Paver calculator

Base depth, cut waste & joint sand questions

The install details that decide how many pallets, cubic yards, and bags you buy.

How many pavers do I need per square foot, and how much extra for herringbone cuts?
Standard 4×8 in brick pavers take 4.5 blocks per sq ft, 6×9 in pavers take 2.67 blocks per sq ft, and 12×12 in slabs take 1.0 block per sq ft before cut waste. Add 5% waste for running bond or stack bond, 8% for basketweave, and 12% for 45° or 90° herringbone because every perimeter course ends in an angled saw cut. For example, a 12×16 ft (192 sq ft) patio in 4×8 in pavers requires 908 pavers (3 pallets) in running bond, or 968 pavers in herringbone.
How deep do I dig for pavers, and how much gravel base do I need in tons?
Excavate 7-3/8 in below finished grade for a walking patio (4 in compacted crushed-stone base + 1 in bedding sand + 2-3/8 in paver) or 9-3/8 in for a residential driveway (6 in compacted base + 1 in sand + 2-3/8 in paver). Because crushed stone shrinks about 15% under a plate compactor and weighs roughly 1.35 tons per loose cubic yard, a 12×16 ft (192 sq ft) patio with a 4 in base requires 2.37 compacted cubic yards, which equals 2.73 loose cubic yards or 3.69 tons of gravel ordered from the landscape yard.
How much bedding sand and polymeric joint sand do I need for pavers?
A 1 in screeded course of coarse concrete sand (ASTM C33) covers about 12 sq ft per 0.5 cu ft (50 lb) bag, so a 12×16 ft (192 sq ft) patio needs 32 bags (0.59 cubic yards) of bedding sand, plus 3 bags (50 lb each) of polymeric joint sand. Sweep polymeric sand into dry joints, run a plate compactor to settle the sand, sweep a second pass, blow all dust off the paver faces, and mist in two light passes so the binder cures without leaving a white haze.
How much does a paver patio cost compared to poured concrete?
DIY paver patio materials—including concrete pavers, 4 in of crushed gravel base, 1 in of bedding sand, polymeric sand, and perimeter edge restraint—typically cost $4.50 to $8.50 per sq ft ($860 to $1,650 for a 12×16 ft patio). Professional installation runs $16 to $30 per sq ft ($3,000 to $5,700+ for 192 sq ft) due to excavation and compaction labor. Poured broom-finish concrete costs less upfront ($8 to $14 per sq ft installed), but interlocking pavers handle freeze-thaw ground movement without cracking and allow individual stones to be lifted and reset.
Do you need a permit for a paver patio?
Most cities do not require a structural building permit for an at-grade, uncovered paver patio, but many municipalities require a zoning or site permit to verify property line setbacks and maximum lot impervious coverage (often capped at 30% to 50% of the lot). Before excavating, check your local paver patio permit rules, HOA architectural guidelines, and call 811 to mark underground utility lines.